LAB FACILITIES

The labs in the department of Electronics and Communication Engineering are well equipped, and are equipped with state of art facilities for the under-graduate course and post-graduate course along with Research and Development in the institute. Students are divided into small groups so as to give them proper exposure.

Different labs in the department are :

  1. Research Lab
  2. Analog Electronics Laboratory
  3. Digital Electronics Laboratory
  4. Microprocessor and Embedded System Laboratories
  5. Analog and Digital Communications Laboratories
  6. VLSI Design Lab
  7. Software & Project Lab
  8. Microwave Lab
  9. PCB Lab
  10. Digital Signal Processing Laboratory
  11. Control System and Instrumentation Laboratories
  12. Artificial intelligence lab
Research Lab

hmpg_img01Department of Electronics and Communication Engineering was established with the vision of developing the department as a center of excellence in R & D, in the field of Electronics and Communication Engineering and make the students blossom into meritorious and self-disciplined engineers by hard work. Electronics and Communication engineering is a swiftly advancing field, with new ideas emerging every other second. From mobile phones to fiber optics and antenna designing for which the lab is equipped with extensive simulation tools like Qualnet, CommSim, OptSim, HFSS and MATLAB. The ECE department at DAVIET prepare students for career in this constantly evolving discipline. Our mission is to develop innovative and simple instructional material to drive the concepts into the minds of students and infuse scientific temper in the student and guide them towards research in communication engineering.

Analog Electronics Laboratories

389a4820These laboratories serve in teaching students electronic measurements, electronic circuit construction, analysis and design in an introductory level. The laboratory comprises of 15 student workbenches. Each features state of art test and measurement equipment and high performance PCs loaded with related software packages like MULTISIM.

Digital Electronics Laboratories

Laying a strong foundation for electronic engineers, the laboratory makes the students understand the fundamentals of Digital Electronics. Explosive development and exciting progress has occurred in the field of Digital System Design of our college strives to keep in pace with technology by providing Digital Trainer Kits with Breadboard area with more than 1200 TIE points, Custom required TIE points are also available, In-built power supply and Power Supply provided +5V/1Amp, GND. for the students to gain sound basics. Addion IC for experiments in blank socket 7420, 7495, 74193, 7483, 7485, 7447, 74121, 74163 & 7490. The laboratory equips ADC and DAC, Digital storage Oscilloscopes.The laboratory comprises 15 student workbenches. The high speed power product and interfacing facilities of high generation Digital System are useful for real-time control and distributed processing networks.

Microprocessor and Embedded System Laboratories

The purpose of this laboratory is to train the students to be familiar with the software and hardware of micro processors and microcontrollers, so that they can gain enough experience to meet the demand of microprocessor era. The laboratory is mainly equipped with 15 sets of 8085, 8086, microprocessor, ARM Microprocessors, microcontroller trainer kits and their peripherals, personal computers and measuring instruments. In each set, a parallel I/O board, a pressure/strain gauge card, a temperature sensor card and a stepper motor are present in order to teach students how to integrate various hardware with microprocessors. All PCs are equipped with various software development tools such as assemblers, compilers and simulators and have internet connection. Each set comprises state-of-the-art measuring equipment such as oscilloscope, logic analyzer, signal generator, digital multi-meter and power supply. In addition, digital IC testers, EPROM programmers, EPROM erasers are available in the laboratory.

Communication Laboratory

This laboratory provides hands-on practical training in the diversified fields of Analog & Digital communication, starting from the principles of modulation up to the recent concepts of Advanced Communication Systems such as GSM, GPRS, EDGE, CDMA, UWB, and Bluetooth Technology. The underlined goal is to let students experimentally explore the applications of their knowledge using excellent facilities. The laboratory consists of ten workbenches each of which contains a PC, special hardware, black & white display digital oscilloscopes (80 MHz), function generators, power supplies, multimeters, etc. All PCs are connected to the internet and loaded with software like Spice and Commsim for simulation of circuits and systems. All basic experiments can be performed related to analog and digital modulations, transmitters and receivers. Black & white spectrum analyzers (MHz) are also available in the laboratory.

Digital Signal Processing Laboratory

matlab-sasThe objective of the laboratory is to enable the students simulate and experiment with digital signals and systems and apply the theory they have studied in DSP course. Students can implement digital signal processing algorithms using different computational platforms and DSP tools. They can critically analyze the behavior of their implementation, and observe the specific limitations inherent to the computational platform and tools. The laboratory combines both hardware and software facilities. The DSP lab is equipped with 35 sets of personal computers, oscilloscopes, Texas Instruments DSP cards, signal generators, digital millimeters and spectrum analyzers. The software used includes Code Composer Studio, C++, etc.

VLSI Design Lab

This Lab has 35 nodes providing excellent facilities for VHDL, Verilog based designing digital systems. Software’s include XILINIX ISE Foundation 6.3i, ORCAD Tools. VLSI Lab provides simulators such as Model-Sim. To have the practical knowledge, trainer kits from Xilinx are also provided. The kits are provided with the latest FPGA and CPLD, so that student can get the real feel of ICs.  These tools & trainers are unique, as they are specifically designed for De-mystifying the “Art of learning VLSI design”.

Software and project Lab

matlab-sas

It is equipped with equipment’s to develop products related to assistive devices, health care, clean technology and Internet of Things (IoT) based system design. Through this centre the students are disseminating their core knowledge in developing products in various competitions like Hackathons and getting recognitions. This centre is utilized for regular curricular activities such as product development laboratory, mini project and main project.

Microwave Lab

matlab-sas

In this lab AM,FM,PM,ASK,FSK,PSK Modulation kits, TDM kit, sample and hold kit,60MHz, Digital storage Oscilloscopes, X band and J band Microwave Test benches, Fiber Optic analog and digital link kits.The typical microwave test bench are precision microwave systems. It consists of rectangular microwave waveguide components. They are used for test and measurement of various microwave modules in the lab. The typical microwave test bench are precision microwave systems. klystron and Gunn oscillator based microwave test benches are available in lab.

PCB Lab

matlab-sas

At its core, PCB design has a solid foundation on electronics engineering, requiring students to draw from concepts in digital, analog, power, and microwave electronics, often when working through a single design. In any project, a designer will have to draw on concepts from multiple engineering disciplines to complete schematics, the physical layout, and ultimately a fully manufacturable design. This includes:Fundamental circuit design and schematic capture, Simulation and analysis, ranging from SPICE to full-wave 3D field solvers, Physical layout, often within mechanical constraints, Electromagnetics concepts, specifically regarding wave propagation and radiation.

ECE Menu